How to Replace a Mazda Key
Mazda is known for its innovative and intuitive technology. Some of these systems improve the safety or performance of your vehicle, while others make driving your Mazda around East Stroudsburg, Easton, and Brodheadsville easier.
The key fob, for example is a great illustration of this. This handy device lets you lock or unlock your Mazda by pressing a button. However its battery must be replaced every now and again.
Lost Keys
Keys that are stolen or lost can cause a lot of trouble. Luckily, it is fairly simple to replace a Mazda key for older models that use regular keys made of metal, however modern cars require special programmable computer chips, which can only be purchased from an authorized locksmith or dealer.
To begin, you'll need the VIN for your vehicle. It's typically found on the driver's side of the dashboard, on your insurance card or on the vehicle's documents. Write down this information to give to the locksmith or dealership.
You'll also require a working spare key. Insert the key into the slot and turn the ignition to ON. After five seconds, you can remove the key, and switch the ignition off. Repeat the process with the second working key. Once mazda 2 car key battery are inserted the computer chip in your car is linked to the new key.
If you lose your keys and don't have a backup set, you'll need to get your vehicle towed to an dealer. Then, you'll need to show proof of ownership and pay for the replacement key. It is possible to wait a few days as the dealer orders and pairs a replacement key to your car. If you can, have an locksmith create a replacement key in place of the dealer to save money and less hassle.
Ignition Cylinder Replacement
The ignition cylinder in your Mazda is the main component that makes it possible to start your car by using the key. If you are having trouble turning it over or you are not able to insert the key into the switch, your ignition cylinder may need to be replaced.
Ignition cylinders tend to fail more often than keys, which last longer. There is no set maintenance schedule for them, but you can make them last longer by keeping your keys free of dust and avoiding excessive jiggling or shaking of the key.
To replace the ignition cylinder, first remove the trim pieces and covers that might be in the way. Depending on the model, you might require removing the steering wheel cover. It is also possible to remove the wiper and accessory switch. Use the socket wrench or screwdriver to depress the release tab on the cylinder. The cylinder is released from the switch and allows it to move out of the housing.
Install the new cylinder by connecting the wires to it, then tightening the two screws on the top, and replacing the switch. Reconnect the battery and ensure whether the new cylinder is able to insert or remove keys. Do this three to five times, and then reconnect the battery and try to start the vehicle to make sure everything is working as it should.
Remote Control Replacement
If your Mazda key remote isn't working, you'll require an expert to get it back in operation. This isn't as frequent as a problem with the ignition cylinder, but it can still leave you stranded. A locksmith will be competent to replace the car key remote and will even take care of all the necessary programming that goes along with it.
You'll need to tell an locksmith the year and model of your Mazda vehicle in order to have them do this. This will allow them to collect the proper items and determine that they'll require any additional programming of keys for your model of Mazda.
It could be that the battery in your key fob is low. The best solution in this case is try to reset your receiver, as this will often bring back functionality. If that doesn't work, you'll have to replace the battery. To do this, you'll have to take the key off and then use a screwdriver with a flat head wrapped in tape to pry the case open on one side. Once you've done that, put a battery into the keyfob. Close the case, and check it's compatible. The RF unit in your Mazda will need to be programmed to recognize the new key.
Transponder Chip Replacement
If you own an Mazda key fob or smart key, there is a good chance that your vehicle has a transponder chips inside it. This tiny piece is basically a mini motherboard that, when it is inserted into the ignition, will send an alert to your car's immobilizer system to let it know that the key is the right one for your car.
Keys are great for security because they stop others from getting your car started. They accomplish this by ensuring that only you have the ability to start it. This is the reason you need to be vigilant to make sure that your key does not get lost or stolen.
A professional locksmith can replace the chip that is transponder. To do this, you'll have to remove the cover from the key fob. Usually it's a thin piece of plastic that can be removed by using the help of pliers or a screwdriver. Next, you'll need to remove the chip, which will appear like an elongated black square or a transparent tube. Once you've completed that, simply place the chip on a piece of tape and attach it near to the ignition lock.
A professional locksmith should be able to complete this task within a short time and will be able to help you get your car back on the road as quickly as is possible. If you're experiencing problems with your Mazda key, call a trusted mobile locksmith right immediately.